LED显示屏电源
                                     JRS-350-5
1.产品说明(Product description
利信电子\利信电源产品生产多年,机壳型AC/DC电源供应器已广为市场采用。体小、易安装于极小机内空间,并具有极小待机符合能源之星要求,具有CE安规认证,强耐环境性、过压过流短路完善的保护,本产品采用自动化设备制造,100%满载高温老化ATE智能化测试设备,产品质保三年。产品广泛应用工业自动化、LED显示屏、工业控制、电子仪器。LI XIN TECHNOLOGY & LI XINPOWER PRODUCTS HAVE BEEN produced for many years, and the case type power supply unit has been widely used in the market. The machine is small in size, easy to install in a very small machine space, and has a very small standby power consumption in line with the energy star requirements, with CE safety certification, strong environmental resistance, over-voltage, over-current, short circuit protection, this product is manufactured with automated equipment, 100% full load high temperature aging, ATE intelligent test equipment, product quality guarantee for three years. Products are widely used in industrial automation, LED display screen, industrial control, electronic instruments.
2.产品参数特性:(Parameter characteristics of product
产品型号(model:JRS-350-5
直流输出范围DC output range):5.0 V, 060A
输出电压精度 Accuracy of output voltage):±2%
纹波Ripple wave):100mVp-p
效率Efficiency):87%
LED指示工作状态:Led indicates working status
输入电压范围 (Input voltage range): 100120VAC6.8A/200240VAC3.4A /250-350VDC Frequency):47-63HZ
空载损耗<0.5No-load loss & Lt; 0.5 W
温控冷却Temperature controlled Fan cooling
输入浪涌电流冷启动:230V时为40AInput surge current, cold start,40A at 230V
电压调整范围Voltage range:4.55.8V
启动上升保持时间Start-up and hold time 230VAC满载时Full load500ms,30ms,30ms/115VAC满载时Full load500ms,30ms,12ms
漏电流Leakage current):<0.75mA / 240VAC
过载保护:过电流点在110%150%,自动检测,自动恢复(Overload protection, over-current point in 110% ~ 150% , automatic detection, automatic recovery
过电压保护 6.57.5V时关断输出电压. Turn off the output voltage when overvoltage protection is 6.5 ~7.5v
绝缘特性Insulation characteristic  输入端与输出端间:3.75KVAC,输入端与外壳间:2KVAC,输出端与外壳间:0.5KVAC 1分钟Input and output: 3.75KVAC, input and Shell: 2KVAC, output and Shell: 0.5KVAC 1 minute
工作温度Operating temperature  -30+70℃
可用于海拔5000地区Can Be used at 5,000 elevation
电磁兼容标准EMC Standard  EN61000-4-2,3,4,5,6,8,11,EN61000-6-2(EN50082-2)
接线方式Connection Mode 9P/9.5mm端子排Terminal Block
外形尺寸Contour dimension 215×115×30mm(××)Length, width and height
机壳号Case number JD-GY-350
重量及包装Weight and packing  0.65公斤/(Kg / only)
3.警示(Warning
防范触电及烧伤,请勿拆除电源外壳.Please do not remove the power supply case to prevent electric shock and burn.
不能将电源安装在潮湿环境和近水源处.Do not install the power supply in a humid environment or near the water source.
不能将电源暴露在高温环境和近火源处.Do not expose power source to high temperature and near fire source.
输出电压和输出电流不能超出规格书所规定的额定值范围.The output voltage and output current can not exceed the rating range specified in the specification.
接地线(FG)必须与大地连接The grounding FG must be connected to the earth
 

Copyright © 广州利信电子有限公司
地址:广东省广州市番禺区沙湾镇沙南工业区永丰路四街2号2楼

本站部分图文来源网络,如有侵权问题请通知我们处理!
  • 在线服务