产品中心
销售18929520539王小姐
销售17666545645凌先生
- 作者:
- 来源:
- 日期: 2019-11-13
- 浏览次数: 3010次
在安装或进行维护之前请先断开市电与设备的连接,确保安全情况下连接操作!请将安装螺丝与电源的内部元件保持足够的安全距离.Before installation or maintenance, please disconnect the power supply from the equipment to ensure safe operation Please keep the mounting screws at a safe distance from the internal components of the power supply）.
风扇和通风孔不能有东西阻挡,如果附近有其他的热源,则至少应该与其保持10-15cm的距离 （Fans and vents should not be obstructed and should be kept at least 10-15 cm away from other heat sources if they are nearby）。
为了防范触电及烧伤危险,请勿拆除电源外壳.（Please do not remove the power supply case to prevent electric shock and burn.）
不能将电源安装在潮湿环境和近水源处.（Do not install the power supply in a humid environment or near the water source.）
不能将电源暴露在高温环境和近火源处.（Do not expose power source to high temperature and near fire source.）
输出电压和输出电流不能超出规格书所规定的额定值范围.（The output voltage and output current can not exceed the rating range specified in the specification.）
接地线(FG)必须与大地连接（The grounding FG must be connected to the earth）
正确选用连接导线，保证导体余量30％，确保连线的所有线芯都在端子排中并且拧紧，以防止接触不良（Correct selection of connecting wire, ensure conductor allowance 30% , ensure all wire cores are in the terminal row and tightened to prevent bad contact.）.
风扇和通风孔不能有东西阻挡,如果附近有其他的热源,则至少应该与其保持10-15cm的距离 （Fans and vents should not be obstructed and should be kept at least 10-15 cm away from other heat sources if they are nearby）。
为了防范触电及烧伤危险,请勿拆除电源外壳.（Please do not remove the power supply case to prevent electric shock and burn.）
不能将电源安装在潮湿环境和近水源处.（Do not install the power supply in a humid environment or near the water source.）
不能将电源暴露在高温环境和近火源处.（Do not expose power source to high temperature and near fire source.）
输出电压和输出电流不能超出规格书所规定的额定值范围.（The output voltage and output current can not exceed the rating range specified in the specification.）
接地线(FG)必须与大地连接（The grounding FG must be connected to the earth）
正确选用连接导线，保证导体余量30％，确保连线的所有线芯都在端子排中并且拧紧，以防止接触不良（Correct selection of connecting wire, ensure conductor allowance 30% , ensure all wire cores are in the terminal row and tightened to prevent bad contact.）.
上一篇： 2.专业数字功放安装说明
